Now that e-cigarettes are becoming more and more popular, they will bring something wherever they go. If you accidentally put the electronic cigarette into the water when using the electronic cigarette, don't worry, there are ways to bring your electronic cigarette back to life.
First of all, if your electronic cigarette accidentally gets into water or falls into the water, please take out the electronic cigarette immediately to minimize the moisture content of the cigarette rod, because the liquid on the circuit board will cause the electrical conductors to connect to each other and cause a short circuit , resulting in a short circuit, and a short circuit will directly burn the entire circuit.
1. First separate the pod from the fuselage
Of course, once our electronic cigarette enters the water, the first thing is to salvage it immediately. Immediately separate the e-cigarette bomb from the plume. Stop bringing the electrodes into contact with each other again.
2. Dry the electronic cigarette rod
Immediately after the first step, find out how the e-cigarette stick absorbs the moisture. If there is a hair dryer at home, you can use the hair dryer to dry the moisture in the cigarette rod, but pay attention: you must use cold air, remember not to use hot air. The circuit board may be shattered by the hot wind. If you don't have a hairdryer, try using a paper towel and hand toss to dry the rod. After taking it dry, let the cigarette rod stand for a few minutes, and then proceed to the next step after the cigarette rod is completely dry.
3. Check whether the cigarette rod is effective
After doing the above steps, the next step is to check if the cigarette rod is broken. After making sure the rod is completely dry, place the cartridge back on the rod. Pay attention to the changes of the indicator lights. Generally, the indicator lights of the pods of the pod pods are all white. If a pod is put in, it will turn red. This is where the problem lies. Then try pumping again, if it's a white bulb and it's pumping, it means there's no problem. If the light bulb is red and cannot be smoked, it means that the circuit board in the cigarette rod may be short-circuited due to water ingress. If the cigarette rod is really damaged due to water ingress, and the above methods cannot be handled well, then go to the after-sales service.